Simply45® ProSeries RJ45 Pass-Through Product Line
Simply45® the industry-leading brand for RJ45 modular plug innovation and performance solutions is proud to introduce our ProSeries Pass-Through RJ45 product line. The Simply45® ProSeries have the most innovative and ground-breaking improvements to RJ45 design and performance since the introduction of the original pass-through RJ45.
The Simply45® ProSeries Pass-Through RJ45 modular plugs are specially designed to provide greater electrical conductivity, improved cross talk performance, and the best PoE/PoH performance of any pass-through RJ45; all critical to supporting today’s LAN cable applications. Our ProSeries Pass-Through RJ45 is available for both unshielded and shielded LAN cable terminations. Key Simply45® ProSeries features include:
Simply45® introduces our exclusive and patented Cap45® (PATENT: 10,811,831 B1). Cap45® is an isolation cap/bar that snaps onto the front of the pass-through RJ45 plug after termination covering the exposed wires ends. Cap45® prevents inadvertent electrical shorting in the RJ45 mod socket due to improperly trimmed wire ends touching the socket walls.
With non-Simply45 brand pass-through RJ45 mod plugs, there is a risk that the wire ends after termination are not correctly trimmed close to the plug. This risk is why some manufacturer brands discourage the use of pass-through RJ45s and some network systems cannot be certified if using pass-through plugs.
With Simply45® ProSeries with Cap45®, these risks are eliminated. That is why Simply45® ProSeries Pass-Through RJ45 Modular Plugs are the recommended pass-through plugs for commercial applications, HDBaseT, PoE/PoH, and all commercial & residential certified systems.
Up until now, using an RJ45 mod plug to terminate shielded 10G LAN cables such as Cat7a/7/6a was time-consuming, frustrating, and if you ever put a Fluke test on the termination, the results were not exactly stellar. Of course, you could use an industrial style RJ45 Field Plug connector, but those are expensive and still require more effort than they should.
We did extensive testing and development to find a high performing pass-through RJ45 mod plug solution that was both easy to use and cost-effective. During our development, we tried all that we could to avoid using a load bar for our 10G shielded pass-through plugs, but without a load bar, we could not achieve our desired IEEE 802.3 10GBASE-T performance.
Simply45® introduces our exclusive Bar45® for our ProSeries Shielded Pass-Through RJ45 modular plugs for shielded 10G LAN cables (and other LAN cables with larger wire diameter & cable OD). Bar45® is a new style of tool-less load bar that simplifies the termination process for larger diameter wire conductors such as those found in shielded 10G cables. No more headaches… no more frustration… and excellent performance.
Simply45® Bar45® does several things to improve the performance of 10G twisted pair cables and make it easier to use than any other load bar:
- Simply45® Bar45® is made of materials that provide better signal isolation and substantially reduces the effects of cross-talk inside the RJ45 mod plug. Bar45® absorbs and limits both near-end crosstalk (NEXT) and far-end crosstalk (FEXT), thereby improving 10G cable performance.
- The Simply45® Bar45® innovative design reduces the length of untwisted wires inside the plug improving twisted pair signal performance and substantially reduces the introduction of NEXT into the signal.
- Bar45® combined with Simply45’s internal RJ45 design innovations allows the LAN cable itself to be inserted further into the plug, reducing the length of untwisted wires. This symbiotic design of load bar and internal RJ45 plug design helps maintain improved headroom performance and better signal integrity than any other pass-through RJ45 solution for shielded 10G cables.
- The uniquely designed Bar45® does not require the frustrating tasks of trying to insert larger wire conductors in the very small holes found on most other load bars. That design was not acceptable to Simply45® Bar45® simply requires you to insert 4 wires into Bar45® and then insert another 4 wires (according to the wiring pattern being used). Trim the wires flush to the load bar, then simply slide Bar45® back to the LAN cable jacket. Fast… Simple… and Easy to Do. No more headaches fiddling with wires trying to get them inserted into a load bar.
Simply45® ProSeries Shielded Pass-Through RJ45 Modular Plugs for Shielded 10G LAN Cables
The Simply45® ProSeries for shielded 10G LAN cables are IEEE 802.3bt PoE compliant 10GBase-T compliant and are recommended for 10G LAN Cables Cat7a/7/6a with FPE insulated wires, and Large OD Shielded LAN cables with PE insulated wires such as Cat6 STP and Cat6a F/UTP. These plugs include some unique features that simplify the RJ45 termination process and improves the terminated plug performance.
With Simply45’s ProSeries Pass-Through Shielded External Ground RJ45 mod plugs… No more headaches… no more frustration… and no more diving deep into your wallet for a 10G cable RJ45 solution.
The Simply45® ProSeries Shielded w/External Ground RJ45 Pass-Through Modular Plugs are IEEE 802.3 10GBASE-T, ANSI/TIA 568, 1096-A, ISO/IEC 11801, 60603-7, 887:1992 compliant. So, no worries about these plugs working in RJ45 jacks and sockets. Everything is compliant. These plugs are also IEE 802.3bt PoE/PoH compliant and UL94 V0 rated for all commercial and residential installations.
Please find below a listing of our current ProSeries product line. Soon, we will be adding additional items and packaging options. Please click the Learn More buttons and you will then be taken the product detail page for that item where you can find out about more important features on each ProSeries Pass-Through RJ45 Modular Plugs.
