STEP 1
Tools Required:
– Phillips screwdriver
– Flat head screwdriver
– Phillips screwdriver
– Flat head screwdriver
STEP 2
Loosen the screw of the trimming blade.
STEP 3
Take off the screw, and put it aside.
STEP 4
Turn to the other side of the tool, take the tool up, and use the front end of the screwdriver to knock the trimming blade a couple times, so the trimming blade could come off the tool a little bit.
STEP 5
Turn to the original side of the tool, use the flathead screwdriver to force the trimming blade to come off completely.
STEP 6
Place the new blade onto the crimper, and use the Phillips screwdriver to tighten it.
